In this simple demo project from 2018 as part of a student group project, we attempted to model lightweight vertical shading louver panels consisting of a galvanised steel frame holding a chain-linked wire mesh to provide support for vines to climb on. Since Revit does not provide a default family for louvers nor the chain-link wire mesh pattern required for the surface of the louver exists to model the architectural component, a new custom family has been created as a demonstration.

An initial attempt at modelling a wiremesh vertical panel family for a shading louver using three vertical reference planes was not satisfactory as the default parameters could not be changed when using these planes. Parameters could be changed in the Family Editor when three alternative reference planes were created to extrude the rectangular louver. However, when loading it into the building project, no property existed to define the created parameters. Since the newly created family is an instance of the Curtain Panel family, the properties for these elements were identical to those of the underlying Curtain Panel template. For the surface texture of the louver, the material “Perforated Metal Mesh Material” was applied using a default texture included in the Revit libraries.

To mitigate the parametric constraints on modelling the chain link wire mesh panel, a “Metric Generic Model Adaptive” Family Template was used to model the two intertwined splines with parameterized reference lines and circles to control the dimensions of the primary unit and the diameter of the wire. A copy of the created family was used to convert the splines into solid wires to be nested in a Metric Generic Model Pattern Based Family Template using a rectangular pattern grid to host the pattern which was in return nested in another Metric Generic Model Adaptive to model one louver consisting of a rectangular patterned divided surface rotated at 45 degrees to maintain the same dimensions of the pattern based family and surrounding circular cross-sectioned mullions, which was lastly nested in another Adaptive Family to model a parameterized system of multiple louvers evenly spaced across the curtain wall panel length.

While modelling the first family, the parameters functionality was observed to be limited once the two splines were converted into solid wires. A copy of that family was used while preserving the original to always change parameters first then extrude the new solid in a copy. Possible approaches were considered including the use of Dynamo to scale the solid forms but the returned element in either cases of Imported Instance or the Free Form Element lost all its assigned parameters though in the latter case the grips of the form were still available to partially manipulate the form. The best solution suggested to this limitation would be implementing a “Scale by Rail” Method [1] to remodel the first family from scratch twice in the same template file – one time on an incredibly large scale with all reference points hosted on splines connected to the origin of the model and the second time on a medium scale by placing a different set of reference points hosted on the previously created splines and controlled by a common Normalised Curve Parameter of Type Integer then use those points to model the solid wires.

The limitation to the orthogonal dimensions of the Rhomboid Pattern for a divided surface was overcome by using a Rectangular Pattern template rotated at 45 degrees to maintain the same dimensions in the second family and the first without having to manually divide the rhomboid fixed distance value by √2 every time the dimension is changed since the Fixed Distance values in UV cannot be parameterized to a formula.

The nested “ONE SINGLE LOUVER” family couldn’t be correctly placed on the nodes of the divided spline path in the “Louver System” family when all six options of orientation for the Placement Adaptive Point were tried and forcibly moving the loaded family and placing it correctly on the node would result in deactivating the repeat button in the modify panel thus making it impossible to parameterise the number of louvers per curtain wall panel.

Dynamo (V: 2.0.1) for visual programming was used to create a graph to get and set the values of parameters in the project utilising nodes from packages “Clockwork for Dynamo - V: 1.31.2” and “archi-lab.net – V: 2018.13.13”. Another graph to explore the possibility of scaling the Pattern Family was implemented.

Related Tools & Supplementary Materials

References

  • [1] M. Sgambelluri, “Size Does Matter: Learn How to Scale and Morph Families,” Autodesk University handout AB3020, p. 39. Accessed 6 July 2018. URL.

1 - Nested Adaptive FamiliesSplines, solids, and the louver

Figure 1: Reference splines, solid wires, the four-point pattern tile, and the nested louver families.

2 - Scale by RailShared normalised curve parameter

Figure 2: The same unit at 40, 60, and 80 drawing units, with the solid wires hosted on the reference grid.

3 - Technical ChallengesPattern rotation and louver placement

Figure 3: A rectangular pattern grid, shown square and rotated 45°, so the tile size stays consistent between families.

4 - Dynamo GraphsParameters and geometry scale

Figure 4: Dynamo graphs for the nested pattern family and for scaling an element from its geometry.

5 - Rendered MeshFinished unit of the nested family

Figure 5: Rendered galvanised steel chain-link mesh and a circular mullion, the finished unit of the nested family.